Valen-Teens Tea and My 4th Version of Butterick 6093

Butterick 6093 Redo..trois…quatre!

valenteen-tea-ii2017’s sewing projects got off to a rocky start, but I threw myself into planning for Valen-Teens Tea with the DFW Costumer’s Guild. We would be hosting a special guest: Laura, the creator and president of Shear Madness!

img_0261-resize

Check out the Shear Madness Blog here.
And the Facebook community here.

laura-and-i

Photo courtesy of Barb Chancey

The event started off as informal and small, but soon grew to quite a full party! We met up at the Secret Garden Tea Room in the Montgomery Street Antique Mall in Fort Worth for an early lunch and, of course, tea:

img_0253-resize

img_0258-resize

After tea, we browsed the antique mall for a little while and then went for a nice stroll in the Fort Worth Botanic Gardens next door.

becky-on-bench-resize

The event’s theme was 1910s, so Becky wore a thrifted Edwardian outfit she put together from the wonderland that is Goodwill, including her favorite lavender skirt, a pin-tucked floral blouse, and a vintage wool coat she got for a steal– $15! To top it off, she wore a rosey straw hat with a floral spray left over from my Edwardian Hat Hack.

img_0277-resize

Becky’s outfit Breakdown:

Pink straw hat – $3.49, Goodwill
Floral Pin-tuck blouse – $4.49, Goodwill
Lavender formal skirt – $7.49, Goodwill
Vintage wool coat – $14.95, Goodwill
Total: $30.42
(Her stockings and shoes were from her daily wear clothes. Always check your own closet! you never know what will work perfectly for a costume!)

becky-bw2

Becky, 1915 style!

For my outfit, I dug Butterick 6093 out of the bottom of my pattern drawer. I’d made it a few years ago and had been less than impressed with the fit. However, I liked the general look and it goes together really fast, so I decided to give it another try.

Previous versions:

IMG_0191

Version 1, July 2015: “Straight” Size 12 made from cotton and a sari. It was a tad small.

IMG_0502

Version 2, August 2015: 1st attempt at a multi-sized dress made from a cotton sheet and a dupatta that Laura sent me. Made for my sister who was the same size I was at the time. It turned out a little too large.

So, I had Goldilock’s problem: the first dress was too small, the second dress was too big…I needed to find one that was just right!

Without the breaking and entering charges, of course.

I decided to make a wearable mockup first. That way, if I ran out of time to make the final dress, I would at least have a version that would work. A wearable mockup is a trial garment that is finished like a regular garment, but isn’t necessarily what you want the final garment to look like. It’s simplified and often made out of an inexpensive/not-so-important fabric. For mine, I had picked up some rolled up remnants of purple mystery fabric at Walmart years ago that had these nifty thick white and purple threads that made pin-tuck-like stripes in the fabric. I had never unrolled it to see what it was like. Turns out it’s cotton organdy! I almost saved it for a different project, but I had bought it with Edwardian specifically in mind, so I now-or-nevered it into a simple version of Butterick 6093:

img_0040-resize

It’s sheer and unlined, so I used French seams for everything except the armscyes and waist seam.

img_0065

Of course, that means that I had to sew every seam twice, but it makes a really nice, neat finish on the inside of sheer fabrics.

Since I’m an entirely different size than I was in 2015, I decided to start Butterick 6093 from scratch. I had tried a new measurement method for my 1868 Monet outfit earlier in January, and while that outfit didn’t go as well as I’d hoped, the sizing method was actually really helpful: Instead of choosing on flat size, like 16, and then doing a whole bunch of alterations sizing it up and down in various places via mockups, you take a few extra body measurements and choose each pattern piece individually.

31955090600_0669b850be_k-1

My 1868 dress of failure.

Original photo by Festive Attyre
(one of the few pictures of this dress)

I got the idea from my Fashions of the Gilded Age by Francis Grimble. In the book, you have to take a lot of incremental measurements of your body in order to scale up the pattern pieces. In the case of Butterick 6093, instead of just measuring all the way around my bust or full bust, I broke it down into two separate measurements: 1) full front bust from side seam to side seam and 2) back from side seam to side seam at bust level. Then I laid out the tissue and measured the pattern pieces themselves instead of relying on Butterick’s suggested measurements.

img_1217-resize

Minka “helped.”

img_1219

By using this method, I ended up with a size 14 back and a size 20 front! Sounds a bit crazy, right? But it works! Truly Victorian, the popular Victorian pattern brand, uses a similar method to select your pattern pieces. The method suits Butterick 6093 well because there are no darts or curved back seams to worry about.

I really love the purple organdy dress, but when I tried it on…

ice-cream

Scientifically accurate rendering.

1910s dresses, like Regency dresses, can be problematic on certain body types. Indeed, the ice cream cone look was totally in from 1910-1913, but that isn’t a look I strive to recreate! The combo of the crisp fabric and the way I had gathered it made for a super-full front that would make a great Lumpy Space Princess cosplay, but not the most flattering tea gown.

Oh. My. Glob.

But when I put it on my dress form, it looked fab!

img_0050

I mean, it helps that my dress form is shaped like an ideal size 10 with the added bonus of having one of my old bras stuffed onto it like a giant Barbie voodoo doll that sulks in the corner of my sewing room:

img_1211

I expect things to look awesome the dress form, but if she’s very-near-to-literally having my exact bustline, why isn’t it a muffin-topped mess on her? It turns out that it’s got everything to do with my short waist.

My dress form is standardized to meet industry standards. That means she has an “average” torso length which happens to be about 2″ longer than mine! So the purple dress looked great on her because the very fitted skirt was the right length for her. On me, however, the top is about 1.5″ too tall causing the skirt to extend past where it should be, pushing the excess bodice length up and over the top, creating the unflattering droopy ice cream cone shape (Why do I end up describing all my sewing projects as desserts?!).
If you look at my previous versions, you will see a similar thing happening even at the smaller sizes.
I removed an inch off the top of the skirt pattern pieces for my final version.

img_0063

Image includes complimentary glob of cat hair for your viewing pleasure.

It was like the magic cure! No more ice cream cone!

img_0272-resize

Of course, the final version doesn’t fit very well on my dress form, but that’s because it fits ME, not HER.

img_0002

Take that, Gertie!

The fabric I used for the final version is an amazing cotton shirting with woven swiss dots. Just like my failed 1868 dress, it is one of the last fabrics I purchased at Hancock’s before they went under. This time, however, I don’t feel like I wasted it! It was a dream to sew with. I used it “inside out” so the fuzzy side of the dots faced out. The cream fabric is a filmy cotton curtain I found at Goodwill that has a drawn threadwork look:

img_0032

Unlike the swiss dot, the curtain fabric was NOT a dream to sew with, so I didn’t make the long undersleeves I planned, but I did use it to make a contrasting rever! Thanks to my great experience with Butterick 3648, I am in love with revers! To turn 6093’s lapel into a rever, I simply taped it onto the bodice pattern piece on one side so when I cut it out, I ended up with this:

img_0001

I’ve grown to admire Butterick 6093’s versatile styling options. Even if you don’t want to do fancy stuff like make revers, it comes with a curved lapel that can be used alone or in a pair, a squared collar, and skirt panels that can be used alone or overlapped, or you can leave all those extra bits off, like I did for my purple dress! It also has two sleeve options, though I haven’t tried the long sleeves with the cuffs yet.

Pattern options include:

  • 3 skirt options: 1 drape, 2 drapes, none
  • 6 collar options: single lapel, double lapels, square collar, square collar+1 lapel, square collar +2 lapels, no collar
  • 2 sleeve options: short sleeves, long sleeves

There are over 30 combos you can make from the basic pieces alone!

And that number doesn’t even include things like changing the wrap direction of the bodice, adding extra embellishments, using more than one fabric, etc.

In fact–as a testament to the versatility of the pattern–we realized that three of us had used Butterick 6093 to make our tea dresses, but our dresses were all very different!

trio-resize2

While I opted for the asymmetrical collar and a double-draped skirt in light cotton, Jane used a textured wool blend and completely omitted the collar, and Laura chose the square collar and a printed cotton.

Instead of gathering the bottom of the bodice, I made two large box pleats. It’s definitely unusual, but it worked! I also box pleated the back in the same manner.

img_0029

I added a kick pleat in the back– the same solution Jane had come up with.

The dress is one piece and closes at the side seam with an invisible zipper. It’s not Historically Accurate, but it’s discreet.

zipper

For those concerned with HA, the zipper can easily be swapped out for hooks and eyes.

Overall, I would say that this pattern is a good one if you are willing to figure out the sizing. It’s flattering on nearly all body types and is a quick dress to make. I made it in about 10-12 hours (most of that time was spent ironing, TBH).

To accessorize my dress, I wore the hat I made in my Edwardian Hat Hack, my sister’s little white purse (which goes to nearly every event!), an antique necklace, some thrifted shoes, and a very serendipitous vintage coat I found the day before.

img_0094

becky-and-i

Photo courtesy of Mistress of Disguise

liz-autochrome-2-resize

My attempt at an autochrome.

Outfit Breakdown

4 yards of green cotton – $16, Hancock’s Fabric
1 cotton curtain – $1.49, Goodwill
1 invisible zipper – $3.50, Walmart
1 spool of thread – $1.95, Walmart
Shoes – $7.99, Goodwill
1960s coat – $18.95, Goodwill

Total – $49.88

Underneath, I’m wearing my beloved Rago 821. The way it fits me very closely mimics a Teens corset, but it’s stretchy and cheap! I got it for about $30 off Amazon. I highly recommend it for 1910s and later!

gate-resize

My updated, more technical review of Butterick 6093 is posted on the Sewing Pattern Review website here.

Megan’s photos of the tea can be found on Flickr here.

group-resize

And my photos can be seen here.

Advertisements

10 thoughts on “Valen-Teens Tea and My 4th Version of Butterick 6093

    1. You should check out Shear Madness! There are costumers from all over the country (and the world!) and I’m sure there’s some fellow Georgians in the mix. You could be Georgian Georgians together! :D

  1. I love this. I laugh and I gnash my teeth in sympathetic frustration. SO glad to know that I’m not the only one who struggles with these issues. I shared this with my husband who wisely said “Doesn’t she know that she should throw it out after the first attempt?” which tells you what happens a lot in my house….
    One question: you mention all your accessories except the one I wanted to know: gloves. Make ’em or buy ’em? And where? I really want some super-long evening gloves for a Regency ball but I have plump arms and no regular long gloves will fit me, even if I could find them. I’m rather desperately considering making a pair, having dredged up an antique how-to-make-gloves book in the bowels of the library.

    1. These ones are oldies I bought nearly a decade ago in an antique shop for $3. There are patterns out there and many people say they are easy and rewarding to make, but all the fiddly fingers would drive me nuts to sew, so I can’t comment directly on the matter, unfortunately. Whichever route you go, make sure you figure out your glove size first. There’s nothing more disappointing than buying a beautiful beaded pair of gloves only to find out they’re too small! If you end up having to buy some, look for a not-so-shiny modern pair of satin gloves. Ebay is full of options both moderns and vintage for about $10-$15 dollars.

  2. You are a wonder! Loved reading every bit of this. I will portray Theodore Roosevelt’s sister again this summer, and will use some of your ideas. Keep them coming!

  3. I’m also short waisted, so I know how you feel. Fortunately I’m also long for a women, so I only need to elongate everything below my waist. Good rescue of a pattern not matching your figure in the beginning!

    1. My sister is also high-waisted, but long-torsoed and tall. The pink version I made for her had nothing changed but the skirt length at the bottom and the waist length was perfect for her (even if it was too large in the waist). Butterick seems to design their patterns with the longer torso in mind, so this pattern is a great option for ladies with that body type.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s