From Bed to Bodice: What to Look for When Using Sheets for Fabric

Goin’ Bat-Sheet Crazy!
I use second-hand sheets all the time for my costumes. They are perfect for mockups, linings, or even fashion fabric! Sheets are cheap and plentiful at second-hand shops, outlet stores, and garage sales. They are a great source of fabric for folks who live far from craft shops, need a costume to be inexpensive, or are just learning to sew. Ruining a $4 sheet is much less painful than ruining a $4-a-yard fabric!
Over the years, I have developed a few guidelines to help me wade through bins of sheets to choose the best ones for the task at hand.

sheets

General Sheet-Shopping Guidelines

  • Pick Queen or King size sheets.
  • 100% cotton is great for a more accurate costume.
  • You can never have too many white and solid colored sheets.
  • Test sheets like you would test any fabric at the store for drape, weight, and weave.
  • Buy a variety!
  • Wash all sheets before sewing with them, especially if they are purchased used.

__________

Choosing Sheets for Mockups

mockups

Mockup sheets are very basic: nearly any sheet will do! However, there are a few guidelines to keep in mind.

Size: A King sized sheet has more yardage than a Twin or Full, meaning you can get more pattern pieces/larger pieces out of it. If you are testing a pattern with large pieces, a larger sheet will come in handy. Twin sheets, however, are perfect for mocking up smaller pieces, like bodices.

Fabric content: Since a mockup is usually just used to see the way a pattern fits together, the content of the sheet’s fabric isn’t usually an issue. However, keep in mind that different types of fabrics have different amounts of stretch and draping, so it is wise to consider what type of fabric you will be using in the final garment and choose a sheet with similar properties. A polyester fabric, for example, may have less give than a cotton one, for instance. This will affect how the garment fits later, so a sheet mockup may fit perfectly, but the final garment might be too tight if the final fabrics have a tighter weave. (PRO TIP: If your final garment is made of woven fabric, don’t use a jersey knit sheet for you mockup!)

Pattern: A mockup will likely be messy and won’t end up in the final garment (unless you choose to use your mockup as a lining or finish it, then see below), so the pattern and color do not matter that much. Bright purple with lime green flowers? Pink elephants? Sexy animal print? DO IT!

Choosing Sheets for Linings

IMG_0185

Sheets can be good linings. Since the lining goes into the final garment, however, it pays to be more judicious.

Fabric Content: Consider what you want your lining to do for your garment. Poly-cotton blends are readily available in a wide variety of textures and colors and are very easy to wash, but they can pill something fierce, become ragged-looking, and scratchy. 100% cotton is breathable, easy to sew and launder, and an excellent all-purpose lining fabric, but there are a few exceptions. For example, does the lining need to be smooth to glide over another garment, like for a coat? Cotton and cotton-blend sheets will cling to other cottons, velvets, and many other soft fabrics, so look for sheets that are slinky, silky, and slippery instead. Many will be polyester, so bear in mind that they might trap heat– a boon for a coat, but a possible curse in the summer!

Weight: Weight can mean two things– the thickness of the fabric and the actual physical weight of the fabric itself– and they aren’t necessarily related! A flannel sheet might be thick, but it may be lighter in physical weight than a densely-woven cotton sheet. I have made the mistake of choosing a thin cotton sheet that turned out to be much too heavy en masse, overwhelming the the light, silky fashion fabric, dragging the whole silhouette down with it. Sheets can be very heavy, so be prepared! Test the weight and drape of a sheet like you would test any fabric at the store!

Size: Check your pattern for the recommended amount of lining yardage to get an idea of what size sheet and how many you will need for your project. This is a handy chart of yardage equivalencies for all sizes of sheets to help you calculate:

Chart by Sew Much Ado

Color/Pattern: Linings and fashion fabrics work together. If there is a chance the lining may show, trying to match or compliment your fashion fabric is a must! If the fashion fabric is sheer or loosely woven, the lining may show trough it, especially in certain lighting. Choose a sheet of a similar shade for the lining or one near your flesh tone so the color of the fashion fabric is not affected, though you can get some interesting color effects if you choose alternate linings. For example, a white fashion fabric may look slightly warmer with an orange cotton lining or a loosely woven black fabric can be laid over a bright magenta lining to produce a changeable silk effect. You aren’t limited to plain colored sheets, either! Printed sheets can make excellent period-correct linings. Some Victorian bodices and skirts were lined with patterned cottons. If the lining won’t be seen at all, color or pattern may not even matter! Made a mock-up in that crazy animal print and want to use it as a lining for your Victorian bodice? DO IT!

It’ll be our little secret…

Choosing Sheets for Fashion Fabric

20151121_144130resize

This 1710s outfit is made from a sateen sheet, curtains, and a hacked-off pair of men’s slacks.

While cheap sheets aren’t as luxurious as duchess silk satin, they can make excellent fashion fabrics, especially for 19th and 20th century day dresses. They are also fabulous for undergarments, like petticoats and drawers. Many of the guidelines for choosing a good lining sheet also apply to choosing on for fashion purposes, but with a few more specifics:

Size: Size matters! If you are wanting one fabric for your whole dress, you may have to get creative with your pattern piece placement to maximize your fabric. King or even California King are ideal. For most dresses, a Queen sheet is the absolute minimum size I will buy. I was able to squeeze a Size 12 Regency dress out of a Twin sheet and an XL 18th century men’s coat out out of a Queen sheet, but both cases required some pretty creative pattern piece placement! Using a sheet set (flat sheet, fitted sheet, and pillowcases) are ideal for dresses that need more than 5-6 yards of fabric.

Color/Pattern: Sheets had a bad reputation in the costuming world because the print can make or break a costume, but now that many of us have access to the internet, it’s easier than ever to study original garments and fabrics. The best way to tell if a particular sheet will work? RESEARCH! Solid colored sheets are the simplest choice, since solid colors have always been in style. Stripes and plaids (woven or printed) are also great options if you find them! Just keep in mind that stripes and plaids are directional and will take extra fabric to pattern match (if that’s your thing). Sheets with printed patterns can make amazing dresses if you are discerning.  It can be a fine line between Laura Ingalls and Laura Ashley (though sometimes it’s the other way around…)! Browse museum collections, like the V&A, to see examples of original fabrics.

Texture/Shine: Basic cotton sheets are plainly woven and matte. They are great for day dresses! My striped Regency dress is made of a plainly woven polyester sheet with printed stripes:
dressSateen sheets are also fairly easy to find and, thanks to their weave, they have a warm luster to them that can be dressed up a little more than a plain woven sheet. They are also very soft and somewhat heavy. I admit I hoard sateen sheets! I’ve made costumes from sateen sheets in 3 different centuries: Chris’s 1710s coat, another 1810s day dress, Amelia’s 1910s dress!
IMG_0246
Regency Dress made of a Cotton Sateen Sheet

Edge Finish: This a small thing, but it really does make a huge difference! Sheets have one edge that is deeply hemmed, creating the top of the sheet, and a narrower hem at the bottom (where the tag is usually attached).  The sides of sheets can be finished in two ways: hemmed or plain selvedge. I frequently cheat and use the wide finished edge of the sheet for the bottom hem or sleeve openings of a dress (like on the blue regency dress above) to save time, but in order to use every inch of fabric, you must unpick or cut the hems which takes a lot of time! If you choose a sheet that has plain selvedge edges instead of hemmed, you save a lot of time. Plus, the selvedge edges don’t fray, so if you use it as your seam allowance, it will be hidden inside your garment and won’t need any finishing to keep it from fraying: WIN-WIN!

sheet types

Left: Sheet with plain selvedge sides
Right: Sheet with hemmed sides

____________

Dang! “Seams” like buying sheets is a real chore, huh? Well, when I write it all out like this, it certainly makes it sound tedious, but like anything, the more you practice, the faster it goes. Soon you’ll be judging all your sheets by how good they’d look as a 1770s petticoat or 1930s skirt. Heck, just the other day I found myself eyeballing my actual-factual bed sheets, noting that I should probably get some new ones because I wouldn’t even save them to sew something with! That’s how you know it’s time for new sheets….and that you’ve got too many sheets at the same time!

Advertisements

The Ultimate One Pattern Piece Project: Elizabethan Coif

6 Steps to Fabulous!

Once again, I am breaking my vow to keep HSF posts off of my blog. However, this project has actually been on my plate for quite some time and by some miracle, it’s completion happened to coincide with HSF Challenge #11.

Since my costume fascination began, my favorite era has been the 17th Century. In particular, I fell in love with blackwork. However, I am incredibly inept at embroidery, almost to the point of being that cliché historical fiction character that scandalizes her family by acting like a impetuous tomboy…

Extras inside indeed: an extra dose of terrible embroidery skills and stubbornness, that is.

…okay, so that really would be me…

Though I have no embroidery skills, I do have enough hand-sewing skills to make me a decent small-scale seamstress. Combined with my love of the 17th Century, blackwork, hats and thrift, I have the perfect set of skills to be a decent coif maker, or at least an excellent blackwork coif faker.

Inspiration

I started this project without a pattern, just pictures and measurements from various online museums. I basically followed my wobbly seamstress instincts. The subsequent tutorial follows the method I developed to create my coif.

portrait

Detail of “Portrait of a Bride” by Johannes Cornelisz Verspronck
Besides her pretty coif, notice how tightly the wire of her headdress is pressing into her cheeks.

English Woman’s Blackwork Coif, circa 1600

Top Stitching and Gathering Detail on an English Woman’s Coif, circa 1590-1610
(see Step 5)

Women’s Coifs showing repetitive patterns and a variety of shapes, circa 1600
Another pair of similar coifs are also in the V&A, notable for one’s bottom edge: “Along the bottom edge, instead of a turned casing there are a series of loops braided in linen bread and stitched to the coif.” Another option for Step 4!

How to Make an Elizabethan/17th Century Coif

TITLE2

Illustrated in Microsoft Office Word  for your convenience and pleasure!

Large_Coif 1I used newsprint to create my pattern. Coifs from this period come in a variety of shapes, but most are based on a simple rectangle of fabric cut into a gentle urn shape. The top of the urn forms a widow’s peak at the top of the head and the curved bulge covers the ears. You can make your shape as simple or extreme as you like. Here’s my pattern:

Paper Pattern

You can test the paper pattern by pinning the top edges together. Bear in mind that the fabric coif will be smaller because of your seams.

Paper Pattern Test

Opportunity for excellent party hats? I think so!

Large_Coif 2Since I cannot embroider well enough, I prefer to use pre-embroidered fabric. Finding a pre-embroidered fabric with a proper motif  and decent colors on a suitable fabric can be a real challenge, but I was lucky enough to find an embroidered cotton shirt for $3 at the local thrift shop. While it’s not perfect, it’s close enough!

Embroidered Shirt

After two weeks of searching for the perfect blackwork fabric, this is probably the most gorgeous thing I’d ever seen in my life. If finding an embroidered fabric is too difficult, you can use plain linen or silk.

I plucked the seams out, leaving me with enough fabric to make about 4 coifs.

Unpicking Stitches

Chinese machine embroidery is fairly easy to unpick, but it did leave prick marks down the edges and where there were darts. A little steam ironing helped make them less noticeable.

Capture

I can make two coifs from the back panel and one from each of the front panels.

For my lining, I used some cheap cotton sheeting from my stash. Elizabethan coifs could be lined or unlined. Many had removable linings so when the inside got dirty, the lining could be removed and washed, saving the delicately embroidered outside from wear and tear. Since my fashion fabric is completely washable, I sewed the lining into my coif as a permanent feature.

Large_Coif 3

I really wish I’d taken more construction pictures, but I was too excited to pause for photos. I sewed my coif using backstitches set about 3/8 inch away from the fabric edge for clean seams. If your lining has a right side, make sure it faces teh right side of your fashion fabric so when you turn it inside out, it faces the proper way.

Large_Coif 4The drawstring casing can be done multiple ways, but just turning up the bottom edge worked best for my coif. I used backstitching again to close the casing because it’s strong and you can manipulate the stitches so that they hardly show up on the outside of the fabric. Since the seam can be seen from the outside of the coif, I made sure the outside stitches were as small as possible.

107_4253

This is the front edge of my coif, showing the smooth seam you get when you use the “pillow” sewing method to connect your lining. To make the front edges crisp, iron them from the lining side before and after sewing the drawstring casing. You can see the stitches on the inside of the drawstring casing on the right.

Large_Coif 5

This is the most complicated-looking step, but it’s actually rather simple. You’ve already finished 2/3 of the top edges by sewing them in step 3, so all you need to do is whipstitch the very top edge shut with small stitches. When you reach the end of you finished edge, sew around the unfinished edges. You can adjust how your coif fits by gathering more or less fabric. Gathering less fabric will make the coif pointy at the back while gathering more will give it a rounder look.

Coif Top Seam

Large_Coif 6

I used bias tape fror my drawstrings because it was what I had immediately on hand, but you can make ties out of yarn, linen tape, twill tape, shoelace, or braided cord. Threading your ties can be tricky. Some people like to use safety pins while others use wire to help guide it through the casing. I used a cheap, thin pair of tweezers to hold one end of my drawstring while I used the other end of the tweezers like a giant needle, pushing it through the casing.

Done!

107_4250

I would like to trim my next coif with a little bit of lace along the front by sewing it inside the seams in step 3. I would also like some twill tape for ties instead of my last-minute bias-tape drawstring, and to take pictures with the strings wrapped around the top like they are supposed to be worn. But for a blind first attempt, I’m rather proud of it!

pencilportrait

paintingstyleresize

nobackground2resize

HSF Breakdown

17th Century “Blackwork” Coif

The Challenge: #11 Squares, Rectangles and Triangles
Fabric: A thrifted cotton shirt with cotton machine embroidery lined with even more cotton!
Pattern: I basically just measured a rectangle using coifs documented at the V&A and cut a light “urn” curve into the sides
Year: 1600-1630
Notions: Cotton thread and bias tape
How historically accurate is it? 50% It’s not linen or silk, but it is all natural fibers. The embroidery pattern is entirely modern, but from a distance, if you squint, it looks fairly legitimate. The construction method is pretty accurate as is the size and how it sits; however, I have much more hair than this coif can contain. It will sit on my head by itself, but I feel more comfortable tying it on so I don’t feel like it’s constantly going to fall off. Next time I will make the coif a bit deeper or try using hair pins to hold it on.
Hours to complete: 3 hours
First worn: By me…at 3am…in my apartment
Total cost: $3 for the embroidered shirt, stash sheeting, and stash thread

A matching forehead cloth would also be nice, and I have plenty of fabric left over for at least one!

Coif and Forehead Cloth, circa 1610

More Coif Tutorials and Information

Full-length Coif Tutorial” – All of the steps from this page in one looooong image

The Coif Question” by Kate at Dressing Terpsichore – Explains why most extant coifs are one-piece, but most paintings appear to have two-piece coifs

Elizabethan Coifs!” by Morgan Donner – Examples of how a coif should be worn with  a forehead cloth to get the proper look

Coif Patterns” at No Strings Attached – Multiple patterns for different styles of coifs

UPDATE!

1-coif-piece-600x600

Truly Hats now offers coif-sized blackworked (by machine) fabric for only $10! The pattern is a replica of an extant 16th century piece.